有限元技术在空调器管路振动分析及设计优化中的应用
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Application of the finite element technique on air-conditioner pipeline vibration analysis and optimization design
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    应用PIC公司的Pro/E软件建立空调器管路系统的三维模型,通过ANSYS软件的专用Pro/E接口将模型导人到ANSYS软件中,在ANSYS软件中建立该管路的有限元分析模型,计算出前20阶固有频率和振型,并且在此基础上模拟压缩机的激励,分析管路的振动响应特性。通过对实例计算分析,提出减少配管振动的优化设计方案,证明了应用ANSYS软件的有限元技术进行空调管路减振的可行性。

    Abstract:

    Three-dimensional pattern of air-condition pipelines was established by Pro/E software, transferred to ANSYS environment, and a pipeline finite element analysis model constructed to caculate the first 20 stairs inherent frequency and vibration mode. Simulating compressor excitation and analyzing pipeline vibration re-ponse characteristics, an optimization design scheme for decreasing the matched pipelines vibration was obtained by caculation and analysis. This demonstrated that it was feasible to decrease air-condition pipelines vibration by the finite element technology of ANSYS software.

    参考文献
    相似文献
    引证文献
引用本文

赵文龙 张增学 李立斌.有限元技术在空调器管路振动分析及设计优化中的应用[J].华南农业大学学报,2004,25(3):112-115

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: